MBG 11.0 - SIP Trunk Fails to use RTP Override Value - Audio issues
Symptoms
In MBG 11.0, assigning the SIP trunk a value from the RTP Override drop down menu has no effect.
Traces will show the incorrect IP address is being sent in SDPs.
Traces will show the incorrect IP address is being sent in SDPs.
Environment
MBG 11.0 and a SIP trunk configuration requiring the use of the RTP override feature in SIP Trunking
Cause
Software error
Resolution
This is fixed in MBG 11.0.0.290 and higher, currently in trials.
You can download the patch below if needed.
Copy the .rpm file to your system using filezilla, winscp etc (sftp)
From the directory where the file resides, enter this command:
rpm -Uvh mitel-msl-tug-1.19.180-01el7hanv.x86_64.rpm
Then stop/start the MBG service (no need to reboot)
You can download the patch below if needed.
Copy the .rpm file to your system using filezilla, winscp etc (sftp)
From the directory where the file resides, enter this command:
rpm -Uvh mitel-msl-tug-1.19.180-01el7hanv.x86_64.rpm
Then stop/start the MBG service (no need to reboot)
Opmerkingen
0 opmerkingen
U moet u aanmelden om een opmerking te plaatsen.