|SmartLink M-ATA Fax Configuration for an IP PBX|
This reference guide shows how a SmartLink M-ATA can integrated in a IPPBX environment. Using a SmartLink M-ATA, regular analogue Fax machines can be still used, even with an IP based PBX.
Call progress tones and dialplan settings for the Netherlands and Belgium can be found here
2. Configure Sip Registrar and Domain. If Sip port is not configured, port 5060 is going to be used
3. For T.38 fax just make sure that “FAX without T.38(Use G.711 fax)” is unselected
4. Configure Phone 1 parameters (phone number, caller ID name, user name and password)
5. Restart the M-ATA to apply the config changes